4/27/2025 8:44:29 PM
China brand DC/DC chip recommends BT1433, BT1433 can replace MP9943,MP4423 and BT5981 can replace LT8301 to make your BOM cost down
Today I would like to introduce to you the DC/DC chip by brand BATELAB, BT1433. This chip can replace the MP9942 and MP4423. It has cost advantages and can provide patterned wafers.
BT1433 is an easy-to-use synchronous step-down DC/DC converter capable of driving up to 3A of load current. Even in a wide input range, it still has good load regulation and line regulation. The chip's synchronous operating mode can achieve higher efficiency within the load range. It adopts current control mode, which has the advantages of fast transient response, simple loop and good stability.
Feature
Input voltage range: 4V to 36V
3A continuous output current
Minimum on time: 90ns
96% maximum duty cycle
0.8V to 32V adjustable output
76mΩ/50mΩ low on-resistance power MOSFETS
Fixed 410kHz switching frequency
High efficiency external 200k to 2.2MHz clock synchronization Precision enable
Internal power saving mode
Internal soft start
Cycle-by-cycle overcurrent protection and hiccup mode short-circuit protection
Overtemperature protection
QFN-8 (3mmx3mm) package and ESOP8 package
Application
Consumer electronics
Multifunction printer (MFP)
Distributed power supply system
BT5981 can replace LT8301
Feature
2.7V to 42V input voltage range
1.2A, 65V built-in DMOS power tube
Low quiescent current: 140uA in sleep mode and 350uA in working mode
Heavy load works in boundary mode
Light load works in low ripple burst mode
Minimum load <0.5% of full load (typical value)
VOUT is set by external resistor
No third winding, optocoupler device
Built-in compensation and soft start
Output short-circuit protection
BT5981Q meets AEC-Q100 automotive standards
Package form SOT23-5
Application
Power supplies for automotive, industrial, medical, automation
Isolated auxiliary/housekeeping power supplies
Welcome to contact SEMILOTEC for more information. China brands chips replacement will be your future choice.